Danny’s Rod Shop
55 Norwood Road
Somerset, KY 42503
Telephone: 606-423-1969
Fax: 606-423-3522
Toll Free: 800-335-1932
Since 1982
SMALL BLOCK CHEVY
LONG WATER PUMP
ALAN GROVE COMPONENTS specialize in fabricated specialty vehicle components. The
mounting brackets are crafted from steel plate with a commitment to quality. All
welding is T.I.G. and all edges are smoothly finished. The brackets include all
the necessary bolts, nuts, spacers, hardware, belt-length recommendations and "easy
to follow" illustrated instructions for simple installation.
With the increasing use of long water pumps on modified veh. These are very popular. Bolt to the top water pump and the 2 front intake bolts. May be used individually or as a pair. Will clear tall valve covers. No drilling or tapping required. A hole is provided in the AC bracket for a heater hose.
101R - AC - LONG PUMP - $87.50
201L - ALT - LONG PUMP - $77.50
Same as 101R & 201L, but for opposite sides. The AC bracket is often used in conjunction with the factor alt. Mount.
101L - AC - LONG PUMP - $87.50
201R - ALT - LONG PUMP - $77.50
Similar to the 101R & 201L, these brackets move the compressor forward & the alt. Out to clear multiple carbs, etc. The compressor belt runs in the groove normally used by thte alternator and vice versa. Will clear valve covers up to 4 1/2” tall.
103R - AC - LONG PUMP - $87.50
203L - ALT - LONG PUMP - $77.50
A very versatile street rod bracket system. Works well with most induction systems. Will clear multiple carbs, fuel injection, etc. Bolts to the head and top water pump bolt holes. The alternator bracket will fit all ‘69 and newer heads. The AC Compressor bracket fits all GM aluminum heads & may be
130R - AC - LONG PUMP - $87.50
230L - ALT - LONG PUMP - $87.50
used on ‘69 thru ‘86 cast iron heads for the upper mounting point. Will clear up to 3 3/4” tall valve covers when used on ‘86 and earlier heads.
This bracket system is similar to our 130R & 230L, but sits about 1” higher to clear valve covers up to 4 1/2” tall when used with ‘86 or earlier heads. Bolts to the heads & water pump. When the AC Compressor bracket is used on heads with one bolt hole,
120R - AC - LONG PUMP - $87.50
220L - ALT - LONG PUMP - $87.50
they will require drilling and tapping one hole for the upper mounting point.
Designed for ‘87 & later cast iron heads including the popular Vortec Cast Iron Heads. Vortec heads use 5/16” intake bolts that point straight down. Will clear valve covers up to 3” tall.
131R - AC - LONG PUMP - $87.50
230L - ALT - LONG PUMP - $87.50
Designed for cars with low hood clearance, Vettes, Camaros, etc. These brackets work great on most vehicles with a wide engine compartment. Trucks, 50’s-60’s cars, etc. These brackets bolt to the head & top water pump bolt holes.
134R - AC - LONG PUMP - $87.50
234L - ALT - LONG PUMP - $87.50
These brackets are designed for ‘87 & later cast iron heads including the popular Vortec Cast Iron Heads. Vortec heads use 5/16” intake volts that point straight down.
135R - AC - LONG PUMP - $87.50
234L - ALT - LONG PUMP - $87.50
These brackets bolt to the water pump & exhaust. No holes needed in head. Furnished with hardware to fit stock exhaust manifolds & most headers. If used with header the front tube must turn down enough to allow access to the bolt hole in front of the second pipe.
123R - AC - LONG PUMP - $87.50
223L - ALT - LONG PUMP - $87.50
This bracket works well if you are adding a compressor to a long water pump application and want to leave the alternator in the factory location on the passenger side. Will work with factory power steering bracket.
119L - AC - LONG PUMP - $87.50
Same as 119L, except this bracket bolts to the front of the head and water pump eliminating exhaust mounting. WILL NOT work with factory power steering bracket.
137L - AC - LONG PUMP - $89.00
The alternator bracket will fit all ‘69 & newer heads. The AC Compressor bracket fits all GM aluminum heads and may be used on ‘69-’86 cast iron heads by drilling and tapping one hole for the upper mounting point.
