Danny’s Rod Shop

55 Norwood Road

Somerset, KY 42503

Telephone: 606-423-1969

Fax: 606-423-3522

Toll Free: 800-335-1932

 

Since 1982

Borgeson aluminum column mounts any standard three-bolt wheel. It is available in polished or machined (brushed)  finish. This smooth column does not have built-in turn signals or horn. Remote units are available. Available in 26”, 28”, 30”, 32” and 34” lengths.

 

Mullins’ Billet Aluminum Rod Column is popular with early rodding enthusiasts for its clean, simple, slim look. Available in Machine Finish or Polished in five pre-made lengths of 26, 28, 30, 32 and 34 inch. We measure from bottom of the lower tube to top of the column where wheel bolts on. We don’t include Center Shaft in our measurement. The lower tube is 1-3/4 inch diameter. The upper cone portion measures 3 inches at the top. Hub Flange is pre-drilled and tapped to accept Bell Style Wheels or any wheel with early Grant Type three hole pattern. Available Non-Tilt Only with No provision for Internal Wiring. We use remote style Turn Signals, and Horn Buttons. Bottom Centershaft is Splined 3/4-36 for easy hookup to u-joint connector. Column is also able to be painted.

Borgeson Stainless Steel Economy Steering Columns are the newest in the Borgeson line. Available in Polished or Brushed finish. Will accept all 3-bolt steering wheels. 3/4”-36 spline shaft.

Easy to install, solid full circle design, slides over the end of the steering column and provides a secure way to mount the column to the floor. Inner collar pivots to accommodate any floor angle. Available for 1-1/2”, 1-3/4”, 2” and 2-1/4” columns. The 2” and 2 1/4” sizes are also available in a split design that separates in half to clear the column shift lever. The split design can also be installed on a column already in the vehicle. Available in 2” and 2-1/4” sizes. Solid machined aluminum, choose polished or machined finish.

Machined from solid billet aluminum, these polished drops come in three styles and 5 different hole diameters to fit most columns. Adjustable swivel easily Compensates for different column and dash angles. Available in 1-3/4”, 1-7/8”, 2”, 2-1/4” And 2-3/8” diameter holes and lengths of 2”, 3”, 4”, 5”, 6” and 7”. The 2-3/8” drop has a notch to clear the wire harness cover on gm columns.

NOTE: Column drops are split so they do not have to slip over the end of the column.

Mullins offers CNC machined Billet Aluminum Tach Mounts that secure the tach directly to steering column. Attaching plate inside housing allows instrument to be rotated to any clocking position. Available in 4 column sizes - 1-3/4, 2, 2-1/4, 2-3/8. Tach Mounts are exact fit for specific instrument brands and models, they are not universal. Available for Classic Instruments brand-all models, Stewart Warner Wings Series, VDO Early Style 3-1/8, SVO brand Tachs, and Autometer Traditional series and Street Rod Series. Available in Machine Finish or Fully Polished. Dash mounts also available.